Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Newport Beach, CA
We install and repair Unilock pavers, retaining walls, and hardscape systems across Newport Beach as an independent contractor, not a dealer or manufacturer-authorized installer. What sets our Unilock work apart here is simple: we read coastal groundwater, salt air, and wind load on every single job before a paver ever touches the ground. If you need Unilock work in Newport Beach, call (877) 373-9230 for a free estimate.

Why Newport Beach Residents Choose Us for Unilock Service
Noel Cardenas grew up in Garden Grove and came up through the trades at Santiago Canyon College, then spent years running structural remodels, concrete work, and exterior builds across Orange County, including Unilock in Costa Mesa. When he started seeing Unilock installations fail early along the Newport Harbor corridor, he dug into why. The answer was almost never the paver. It was the base, the edge restraint, and the drainage underneath.
We carry Unilock’s own matching units and proprietary edge and joint components, so a repair blends with the original field instead of looking patched. We also stock the base materials and edge products that actually hold up to marine-layer humidity and salt air. That means faster turnaround for Newport Beach homeowners who don’t want to wait three weeks for a re-set. One contractor, every phase – from the gravel up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Newport Beach
These are the failures we see most often on Unilock work in Newport Beach, and they all trace back to one thing: standard inland detailing doesn’t survive coastal conditions.
- Heaving edges from corroded steel restraints. Salt air off the harbor and oceanfront eats through standard steel edge restraints and fasteners within a few seasons. Once the edge lets go, the paver field shifts and heaves. We replace with Unilock edge restraint rated for coastal exposure.
- Settled pavers on fill lots. On Balboa Island and parts of the Peninsula, lots sit on fill over former tidelands. High groundwater wicks up through an undersized base, and Unilock pavers settle unevenly under foot traffic and driveway loads. We rebuild the base with proper depth and drainage before anything gets re-set.
- Chipped and lifted pavers after Santa Ana winds. Exposed bayfront patios catch the full force of Santa Ana events. Tight-jointed pavers with inadequate edge restraint and joint sand get lifted and chipped. We re-set with wind-load detail in mind.
- Water backing against the foundation. Older beach cottages on small lots often have pavers laid tight to the sill with no drainage gap. Winter rain backs up against the foundation, and the field drains poorly. We cut the gap and re-grade the slope so water moves away from the house.
- Erratic color matching from previous patch jobs. When a previous contractor used whatever paver was on the truck, the field looks like a quilt. We source Unilock’s matching units by line and color so the repair disappears into the original work.
Unilock Service in Newport Beach: What Local Conditions Mean for Your Project
Here’s the thing about Newport Beach that inland cities like Irvine or Tustin never deal with: much of Balboa Island sits on fill over former tidelands, and groundwater runs high and close to the surface year-round. On a lot off Marine Avenue, our crew hit water within eighteen inches of the planned base on a Unilock Brussels Block patio behind a 1960s beach cottage. We dewatered the excavation, built a deeper compacted base with drainage directed away from the foundation sill, and set the pavers on Unilock edge restraint rated for salt air. The patio has stayed flat through two winters. That’s the difference between reading the site and pulling a standard spec off a truck. The material you pick today is the problem you solve, or the one you live with, ten years from now.
Unilock Models & Products We Service in Newport Beach
We work across the Unilock lines that make sense for Newport Beach’s housing stock and coastal conditions. That includes Brussels Block for driveways and patio fields, Beacon Hill Flagstone for flagstone-look walkways and courtyards, Cambridge Cobble for traditional coastal cottage character, and the Pisa2 retaining wall system where grade changes need a structural solution. Our approach on every job is the same: use Unilock’s own matching units and proprietary components so the system stays consistent. We don’t push a full tear-out when a re-set with fresh base and new edge restraint will outlast the field. But when a wall or driveway has lost its base, we say so and rebuild it properly rather than patch the surface.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Newport Beach
What drives the cost in Newport Beach is access and what’s under the surface. Small-lot beach cottages mean tight access for equipment. Fill lots mean deeper excavation and more base material. Coastal conditions mean better edge restraint. Here’s where the numbers typically land:
| Unilock Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition (with Unilock hardscape tie-in) | $45,000 – $130,000 |
Every estimate is free, written, and line-itemed so you see exactly what the base, drainage, edge restraint, and pavers cost. No vague numbers. Call (877) 373-9230 to schedule yours.
Serving Newport Beach, CA - Our Local Coverage Area
We serve Newport Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Newport Beach
No, and we’re clear about that. We’re an independent hardscape contractor who works with Unilock products because the material holds up when the base and drainage are done right. Being independent means we spec what the site needs, not what a dealer program tells us to push. The warranty on the pavers themselves comes from Unilock; the workmanship and base warranty comes from us.
Yes, we use Unilock’s own matching units and proprietary edge and joint components. That means a repaired section blends with the original field instead of standing out. For older lines that are no longer in active production, we source matching units through our supplier network before quoting a patch job.
Yes, and we do it regularly on the Balboa Peninsula and Balboa Island, where lots are small and access is tight, unlike San Joaquin Hills. Smaller-format lines like Cambridge Cobble and Brussels Block work well because they’re maneuverable by hand where equipment can’t reach. The bigger issue on these lots is drainage and groundwater, which we address before the first paver goes down. Call (877) 373-9230 and we’ll give you a straight answer on what your lot needs.
A repair, meaning a re-set or edge replacement, typically runs one to three days depending on the size of the field and what we find underneath. A full driveway or patio installation with proper base work runs longer, usually one to two weeks factoring in excavation, base compaction, and any dewatering if we hit groundwater. Newport Beach’s climate lets us work year-round, but winter rain can shift a schedule. We give you a written timeline before we start.
Three reasons: groundwater on fill lots means deeper excavation and sometimes dewatering, salt air means upgrading to corrosion-resistant edge restraint, and small lots mean tighter access for equipment and materials. The pavers themselves cost the same. What changes is the engineering underneath them. Call (877) 373-9230 for a free estimate, and we’ll walk you through exactly where the money goes.
Service Areas Near Newport Beach
We run Unilock crews out of Garden Grove, so we cover Newport Beach and the surrounding area without a long dispatch. That includes Corona, Coto De Caza, Garden Grove, Midway City, Stanton, and Westminster. We also have dedicated pages for Unilock service in Yorba Linda and Unilock service in La Habra if you’re reading this from a few miles inland. For everything else, check our Newport Beach service area page for full coverage details.
Book Your Unilock Service in Newport Beach Today
If your Unilock patio has shifted, your driveway is settling, or you’re planning new hardscape on a lot that fights back, call (877) 373-9230. We’ll walk the site, tell you what’s going on underneath, and give you a written estimate. Free, no pressure, just straight answers from a contractor who knows the material and the coast.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Newport Beach and greater Orange County.