Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Cypress, CA
We provide independent PGT window and door installation, repair, and replacement across Cypress, CA 90630. What makes our PGT work different here is simple: we match new impact-rated glass to the original 1950s-70s stucco reveals and aluminum frame profiles that define this city’s housing stock. If you’re researching PGT options for a Cypress home, call (877) 373-9230 for a free estimate. Noel Cardenas and our crew at Garden Grove Contractors have spent years retrofitting PGT products into mid-century tract homes without wrecking their original elevations.
Why Cypress Residents Choose Us for PGT Service
We’re not a window shop that happens to sell PGT. We’re a general contractor that’s been inside enough Cypress homes to know what actually fails and why. When a homeowner near Los Alamitos Boulevard calls about a sticking PGT slider or a fogged WinGuard panel, we already have a mental map of the house: single-story, 1960s slab foundation, original stucco, probably a west-facing wall that’s been cooking in afternoon sun for fifty years. Noel grew up in the West Grove neighborhood of Garden Grove and came up through the vocational trades program at Santiago Canyon College in Orange. He’s been running exterior builds and window retrofits across the greater Garden Grove PGT service area long enough that neighbors call him before they call the manufacturer. We’re independent, which means we’re not pushing any one PGT line. We spec the right glass for the situation.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Solve in Cypress
- Fogged glass and seal failure on south- and west-facing windows. Cypress gets hot, dry Santa Ana wind events, and windows on the Los Coyotes Diagonal edge take direct afternoon sun for decades. PGT WinGuard aluminum units from the 1980s and 1990s often lose their insulating gas seal. We replace the sash or the full unit, matched to the original frame profile.
- Sticking windows and doors from slab movement. Cypress sits on expansive soils that swell in wet winters and shrink in dry summers. That movement torques window frames out of square. A PGT door that won’t latch or a window that drags is often a foundation-settlement issue, not a hardware issue. We diagnose it correctly the first time because we understand both framing and fenestration.
- Aluminum frame corrosion near coastal-inland edges. Homes along the Los Alamitos edge get more ocean air than people expect. We see pitting and white oxidation on older PGT aluminum frames and especially on hardware. We replace corroded components with OEM parts when available, or quality aftermarket hardware that matches the original finish.
- Impact window delamination after thermal cycling. PGT impact-rated laminate can start to peel at the edges after years of heating and cooling cycles. We’ve seen this on original WinGuard units in Cypress tract homes built in the early 1970s. The fix is honest: sometimes it’s a sash replacement, sometimes the glass package alone.
- Water intrusion from flashing failures on stucco additions. Cypress additions and second-story pops often have original or poorly detailed flashing around window openings. When we install new PGT windows, we rebuild the flashing and re-match the stucco reveal so water stops finding its way in during rainy winters.
PGT Service in Cypress: What Local Conditions Mean for Your Project
Here’s what we know from working this city block by block. Cypress is a master-planned suburb incorporated in 1956, and nearly every home was built in a narrow window between the late 1950s and the early 1970s. That means the window openings are standardized: aluminum frame profiles, dimensional lumber headers, and stucco returns that are typically one to two inches deep. When a PGT unit fails, the replacement has to fit that original opening and match the stucco return or you either end up with a smaller window, a patched exterior that never matches, or an expensive re-stucco. On top of that, lot coverage limits and HOA review on those tight parcels often shape what you’re allowed to do before the permit set is even drawn. So the PGT in Stanton and nearby Cypress retrofit on a 1963 ranch near Los Coyotes Diagonal isn’t a swap-out; it’s a preservation job. We’ve worked on streets where the HOA won’t allow frame color changes, which forces us to source specific PGT finishes. That’s the work we’re built for. The material you pick today is the problem you solve, or the one you live with, ten years from now.
PGT Models & Products We Service in Cypress
We install and repair across PGT’s current and legacy product families. The WinGuard Aluminum Series is common on Cypress tract homes built before 1990. The WinGuard Vinyl Series shows up on newer re-fits and additions where homeowners wanted a different aesthetic or better thermal performance. We also handle SolarZone Series high-efficiency units and the Sentinel by PGT line, which is popular for second-story pops because of its multi-point locking and impact rating. On older or discontinued models, we use high-quality aftermarket components that meet or exceed the original spec. On current product, we order OEM PGT parts whenever the lead time works for your project. We also carry a local stock of common PGT hardware, rollers, latches, and seal components so Cypress jobs don’t stall waiting on a factory part.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Cypress
What you’ll pay depends on how many openings you’re replacing, whether the frames are salvageable, and what glass package you need. Retrofit work on mid-century stucco homes typically runs lower than full new-construction installs because the framing is already there, but matching HOA or architectural review requirements can add time. Every free estimate from us includes a written line-item scope, the specific PGT model we’re recommending, and a schedule that respects your street’s parking and HOA constraints. Call (877) 373-9230 to set up a walkthrough. We’ll tell you honestly whether a repair makes more sense than a replacement.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
Serving Cypress, CA - Our Local Coverage Area
We serve Cypress and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Cypress
In most cases, yes. We pull the old unit and install the new PGT window into the original opening without tearing out more than a small band of stucco around the frame, then patch the reveal so it blends cleanly into the existing texture. If the stucco around the opening is already damaged or delaminating, we may need to strip back further, but we never widen an opening without talking to you first. Call (877) 373-9230 and we’ll tell you exactly what your house will need.
Window replacement with the same opening size typically moves through the city’s over-the-counter permit process, but adjacent HOA review of frame color or glass type can add a step. If we’re altering the opening or doing a second-story pop, the permit set gets more involved. We handle the paperwork and know which Cypress neighborhoods have architectural review committees that need notice.
Fogged glass almost always means the insulated glass unit has lost its seal. The frame may be perfectly fine. On many PGT WinGuard units, we can replace just the glass package or the sash and keep the original frame. That’s often half the cost of a full tear-out. We’ll give you a straight answer after we inspect it. Call (877) 373-9230 for a free estimate.
Santa Ana winds come out of the northeast and hit west- and south-facing walls hard. On PGT units that are twenty or thirty years old, that sustained wind pressure can expose worn weatherstripping, loose hardware, and deteriorated seals. On newer impact-rated glass, like La Palma area homes often choose, the performance is excellent. We recommend homeowners with original windows on the windy side of the house get a yearly seal and hardware check.
Yes. We do second-story pops across Cypress, and PGT’s Sentinel and WinGuard lines are often our recommendation there because of the higher wind exposure and the energy code requirements that kick in when you’re adding conditioned square footage. We coordinate the window package with the framing, flashing, and stucco work so you don’t have a window contractor and a stucco contractor pointing fingers at each other.
Service Areas Near Cypress
We serve Cypress and the surrounding communities, including PGT service in Fullerton to the northeast, PGT service in Tustin to the southeast, and Garden Grove just east of the city line. We also take calls from Stanton, Westminster, and Midway City homeowners who need PGT sales & service from a contractor who knows the mid-century tract stock. If you’re in the broader Cypress service area, we’ll come out, look at your openings, and tell you what the house actually needs.
Book Your PGT Service in Cypress Today
We’re ready to walk your Cypress property, look at your existing windows, and give you a written estimate that covers materials, labor, and site conditions. Call (877) 373-9230 to schedule. We’ll bring the PGT samples and a straight answer.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Cypress and the greater Orange County area.