Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Perris, CA
We provide independent Mr-Glass service across Perris, CA, including frameless shower enclosures, semi-frameless sliders, neo-angle corner units, and mirrored cabinet assemblies. What makes our work different here is that we read Perris soil and slab movement before we touch the glass. Call (877) 373-9230 for a free estimate on any Mr-Glass repair or replacement in the 92570, 92571, 92572, or 92599 ZIP codes. Garden Grove Contractors is an independent Mr-Glass service provider, not manufacturer-affiliated or authorized.
Why Perris Residents Choose Us for Mr-Glass Service
We’ve spent years installing and correcting Mr-Glass shower enclosures, mirrors, and glass systems across Perris tract builds, ADU conversions, and work that runs alongside full exterior scopes. We know which failure is a hardware wear issue and which is a wall that moved. That distinction matters more in Perris than almost anywhere else in Riverside County, because your slab is moving under you whether you notice it or not.
Our owner, Noel Cardenas, came up through the Santiago Canyon College trades program in Orange, then spent years working every phase of residential and commercial builds across the greater Garden Grove area. He now runs a crew that sources from the brands pros trust, and we bring that same material-fluent discipline to Mr-Glass service work. One contractor, every phase.
As an independent glass and construction team, we work with Mr-Glass products but are not authorized, sponsored, or warranted by Mr-Glass. That independence works in your favor: we recommend the fix that serves your home, not a parts catalog.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Perris
- Door bind and hinge sag from out-of-square rough openings. Perris sits in seismic Zone D near the San Jacinto fault, and tract builders lay expansive clay foundations west toward the San Jacinto. The slab moves. Your Mr-Glass frameless door starts dragging and hinge screws pop, and the glass itself is fine. We re-shim, re-flash, and re-hang on Mr-Glass hinges rather than blame the enclosure.
- Curb and channel leaks where the original tract shower pan is off. Builders set the pan to the drain, not to the future enclosure line. Water tracks under the Mr-Glass frame at the threshold. We re-seal the curb line and reset the glass-to-pan junction so the floor outside the shower stays dry.
- Tempered-edge chipping and seal failure on slider bottom rails. Perris tap water carries minerals, and triple-digit Perris Basin summers bake those deposits into Mr-Glass tracks and roller assemblies. Rollers seize, seals crack, edges chip. We swap in genuine Mr-Glass hardware where it’s still available and a quality aftermarket roller or seal only when an OEM part is discontinued.
- Mirror desilvering along the bottom edge. Older 1980s stucco-on-wood-frame builds and manufactured homes in the 92570 fringe wick slab moisture and humidity up behind wall-mirror assemblies. The silver backing turns brown or black at the base. We replace the mirror and address the vapor path so the new one doesn’t do the same thing in five years.
- Racked mirror walls after shear-wall work or slab creep. When Perris plan check pushes lateral bracing on a remodel, walls get stiffened and sometimes move a hair. A Mr-Glass mirror mounted across that line can bind or crack its fasteners. We template and re-mount to accommodate the new geometry.
Mr-Glass Service in Perris: What Local Conditions Mean for Your Project
Perris is a designated seismic Zone D near the San Jacinto fault, and much of the new tract construction on former farm parcels sits on expansive clay. Riverside County and City of Perris plan check scrutinize shear-wall and foundation detailing far more than in neighboring cities, and that same lateral bracing and slab movement shows up as out-of-square shower openings and racked mirror walls years after the home was built. On a 2010s tract home off Ramona Expressway in the 92571 growth corridor, a homeowner’s Mr-Glass frameless shower door had been dragging and popping its hinge screws for months. Our tech pulled the door and found the curb was level at the drain but 3/16 inch out at the glass line on expansive-clay slab movement. We re-set the hinge-side jamb, shimmed and re-flashed the curb, then re-hung the original tempered panel on new Mr-Glass hinges with a fresh sweep and seal. The door now swings clean and the customer kept their glass instead of paying for a whole new enclosure. If you live in 92570, 92571, or 92572, your rough opening has almost certainly shifted since the day the house was framed. That’s not bad construction. It’s Perris geology. We template and set Mr-Glass glass to the opening as it exists now, not as the builder drew it.
Mr-Glass Models & Products We Service in Perris
We work on Mr-Glass Frameless Shower Enclosures with a 3/8-inch hinged door and fixed panel, Mr-Glass Semi-Frameless Sliding Shower Doors, Mr-Glass Neo-Angle Corner Shower Enclosures, and Mr-Glass Mirrored Medicine Cabinet / wall-mirror assemblies. Parts approach: we use genuine Mr-Glass hinges, rollers, handles, and seals where they’re still available, because the pivot and hinge geometry is what keeps a frameless door aligned. We substitute a quality aftermarket roller or seal only when an OEM part is discontinued. If the tempered glass is sound, we re-plumb, re-shim, and re-seal rather than sell you a whole new enclosure. If the tempered panel is chipped at the edge or the hole pattern is worn oval, replacement glass is the honest answer. For full Mr-Glass sales & service, our crew handles everything from a single panel match to a full bathroom re-scope.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Perris
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Roof Repair | $400 – $1,800 |
A free estimate includes a site check of slab movement at the curb line, an inspection of the existing Mr-Glass hardware, and a written line-item quote so you know what’s repair and what’s replacement. Call (877) 373-9230 to schedule yours.
Serving Perris, CA - Our Local Coverage Area
We serve Perris and nearby communities. Also see Mr-Glass service in Good Hope. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Mr-Glass Construction in Perris
Why does my Mr-Glass shower door drag or pop its hinges in a newer Perris tract home?
Your rough opening has moved. Perris tract construction sits on former farm parcels with expansive clay that swells and shrinks with moisture. The slab shifts, the framed opening goes out of square, and your Mr-Glass door binds at the hinge line. We re-shim and re-hang the door to the opening as it exists now. Call (877) 373-9230 for a slab-movement check and exact quote, free.
My Mr-Glass slider track is crusted white and the rollers seize – is that the water?
Yes, it’s the water plus the heat. Perris Basin tap water carries minerals, and triple-digit summers bake those deposits into the bottom track. The rollers grind. We clean, de-scale, and swap in genuine Mr-Glass rollers where available. Call (877) 373-9230 for a repair quote, free.
Do I need a permit to convert my tub to a Mr-Glass walk-in shower in Perris?
Yes, if you’re moving valves, changing the pan, or touching drain plumbing. City of Perris plan check reviews the plumbing and the pan detail. Garden Grove Contractors pulls permits and handles the inspection. Call (877) 373-9230 to discuss your conversion.
Can you match my existing Mr-Glass enclosure if only one panel is broken?
In most cases, yes. We carry stock Mr-Glass panels for the common 3/8-inch frameless and semi-frameless lines, and we can source a custom tempered panel where needed. We match edge profile, hole pattern, and hardware. Call (877) 373-9230 with your model and measurements.
Why does the mirror in my 1980s Perris bathroom look dark along the bottom?
The mirror is desilvering, and in Perris it’s usually slab moisture behind the wall. Older 1980s stucco-on-wood-frame homes and 92570-area manufactured homes wick humidity behind the glass, which corrodes the silver backing. We replace the mirror and address the vapor path. Call (877) 373-9230 for a quote.
Service Areas Near Perris
We run Mr-Glass service across Perris service area and the surrounding Inland Empire. Need help in neighboring communities? We also serve Mr-Glass service in Colton and Mr-Glass service in Moreno Valley. Our crews regularly cover Corona, Stanton, and Westminster as well.
Book Your Mr-Glass Service in Perris Today
If your Mr-Glass door drags, your slider seizes, or your mirror darkens, call (877) 373-9230 to schedule a free estimate. We’ll check the slab movement, quote the fix, and tell you honestly whether you need a re-hang or a replacement. From the countertop to the roofline, one contractor, every phase.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Perris since 2023.