Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Silver Lakes, CA
We install, repair, and replace Jerith aluminum fencing, railing, and gate systems throughout Silver Lakes, and we do it as an independent crew that understands both the product line and this community’s specific HOA review process. The single factor that separates Jerith work here from anywhere else off I-15 is the combination of sandy, wind-scoured Mojave lots and the architectural committee that has to sign off before a single post hole gets dug. If your Jerith fence is leaning, chalked, or dragging at the gate, call (877) 373-9230 and we’ll give you a straight answer on repair versus replacement.
Why Silver Lakes Residents Choose Us for Jerith Service
We’ve set and repaired Jerith aluminum runs across Silver Lakes long enough to know the failure patterns before we even step onto the lot. The windward pickets wear first. The gate hinges go out of plumb after a winter of freeze-thaw. The post footings set into sandy soil loosen under load. Noel Cardenas, who leads our crew and grew up in Garden Grove learning the trade at Santiago Canyon College, has spent years working exterior builds that face Southern California’s dry heat and wind. That experience carries straight into how we handle Jerith work here. We’re independent, not authorized or sponsored by Jerith, which means we’re free to tell you when a repair makes sense and when a replacement is the honest call.
We keep Jerith’s own replacement pickets, post caps, hinges, and self-closing gate hardware in our supply rotation for Silver Lakes jobs. When a finish or component has been discontinued, we say so up front rather than forcing an aftermarket part that won’t match. For full-scope property work beyond fencing, we handle home additions, window replacements, and the rest of the exterior as one contractor and one contract. See our Jerith service page for the full scope of what we cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Silver Lakes
- Sand-abraded powder-coat on windward pickets. Silver Lakes lots sit open and flat, and the west-facing side of a Jerith run takes a beating from blowing sand. Once the powder-coat is cut through, bare aluminum oxidizes and the finish chalks and pits. We replace abraded pickets and match the original color so the repair disappears into the run.
- Freeze-heaved post footings that lean the whole run. Winter overnight freezes followed by fast warm-ups move shallow footings in sandy soil. Posts tilt, panel-to-post connections gap, and the fence starts to drift. We pull and re-set posts in proper concrete collars with drainage, which is the fix that actually holds in this soil.
- Gate hinges dragged out of plumb. The same freeze-thaw cycles that heave footings also rack gate hinges. Gates drag, self-closers fail to latch, and pickets bind. We realign the hinge geometry and replace worn hardware with Jerith’s own components so the gate swings and latches correctly.
- Heat-degraded gate closers and latch hardware. Triple-digit summers cook the gate hardware long before the aluminum panels show wear. Spring closers weaken, hinge bushings crack, and latches get stiff. We replace them with Jerith-spec hardware rated for this climate.
- Posts set without concrete collars loosening under wind load. In sandy desert soil, a post dropped straight into dirt will work loose. The wind pushes the panel, the post leans, and openings appear at the connections. We fix the footing, not just the visible lean.
Jerith Service in Silver Lakes: What Local Conditions Mean for Your Project
Silver Lakes is a man-made lake community in unincorporated San Bernardino County, and almost every home sits under HOA governance. That means a Jerith fence or gate run here doesn’t start with a dig, it starts with a submittal. Style, height, and color go to the architectural committee for approval before a single post is set. Contractors working out of Barstow or Victorville routinely skip this step, then the homeowner gets hit with a violation notice and an order to tear out the work. We don’t skip it. On a lot off the lake side of Silver Lakes, our crew replaced a wind- and sand-worn Jerith Colonial-style picket fence whose powder-coat had been cut through on the west-facing pickets and whose gate hinges had heaved out of plumb over a winter of freeze-thaw. We pulled and re-set the leaning posts in proper concrete footings with drainage, swapped the abraded pickets and gate hardware, and matched the approved color and panel profile the HOA had on file so the review cleared before we touched the ground. That’s how Jerith work here has to be done.
Jerith Models & Products We Service in Silver Lakes
We work on the full Jerith aluminum lineup common to this community. That includes the Classic and Colonial-style aluminum picket fence you see on front yards and HOA-approved perimeters, the 2-rail ornamental runs, and the pool-code barrier fence with self-closing gate assemblies that Silver Lakes homeowners use around lakefront properties. We also handle Jerith decorative aluminum railing for porches, steps, and patio perimeters, plus the rackable estate and ranch-style fence built for graded and sloped lots. For parts, we spec Jerith’s own replacement pickets, post caps, hinges, and self-closing gate hardware so the assembly keeps its original engineering and finish match. Where a discontinued finish is a problem, we tell you before ordering anything.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Silver Lakes
Pricing depends on whether you’re replacing a section or installing a full run, and on how much footing work the sandy Mojave soil requires. A straight panel-for-panel swap on level ground costs less than re-setting every post in new concrete collars. Here are the ranges we quote across Silver Lakes:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
Every estimate includes a walk of the lot, a look at the existing footings and soil, and a line-item quote so you know exactly what you’re paying for before anything starts. Call (877) 373-9230 to schedule a free estimate in Silver Lakes.
Serving Silver Lakes, CA - Our Local Coverage Area
We serve Silver Lakes and nearby communities. Also see Jerith in Adelanto. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Silver Lakes
Yes. Nearly every home in Silver Lakes falls under HOA architectural review, and fencing is one of the most commonly submitted items. Style, height, and color all need committee approval before ground is broken. We prepare the submittal with the approved panel profiles and colors on file and wait for the clearance before setting a single post. Call (877) 373-9230 if you need help determining what your HOA requires.
Over time, wind-driven sand can cut through the powder-coat on the windward face of the pickets, and once bare aluminum oxidizes, the finish chalks and pits. The panels themselves stay structurally sound far longer than the coating. We replace abraded pickets with Jerith’s own color-matched components, and we can advise on orientation and landscaping that reduces the sand load on the most exposed sections. Call (877) 373-9230 for an exact assessment of your run.
Silver Lakes winters bring overnight freezes followed by fast warm-ups, and that cycle heaves shallow post footings and racks gate hinges out of plumb. The gate starts to drag, the self-closer won’t seat it fully, and pickets bind. The fix is realigning the hinge geometry, re-setting any leaning posts in proper concrete collars, and replacing the worn hardware with Jerith-spec parts. Call (877) 373-9230 and we’ll diagnose it on site.
Yes. Jerith’s rackable aluminum estate and ranch-style fence is designed for graded and sloped lots, and we set the posts and panel transitions so the run follows the terrain without gaps at the bottom rail. Most Silver Lakes lots have some pitch even where they look flat, and we account for that in the footing depth and panel layout. Estimates are free, call (877) 373-9230.
If a single panel or the gate hardware is the issue, we repair it. If coating failure and footing heave have hit multiple sections, replacing the run is usually the honest call, because piecing repairs into a failing assembly costs more over time. We’ll tell you which you’re looking at before you spend a dollar. Call (877) 373-9230 for a straight answer.
Service Areas Near Silver Lakes
We run Jerith service throughout the high-desert communities along I-15 and into the Inland Empire. That includes Silver Lakes service area coverage for full exterior scopes, plus Jerith service in Palm Springs and Jerith service in Morongo Valley for clients with properties across the desert. We also serve Corona, Coto De Caza, Garden Grove, Midway City, Stanton, and Westminster.
Book Your Jerith Service in Silver Lakes Today
If your Jerith fence is leaning, chalked, or dragging at the gate, don’t wait for the next windstorm to make it worse. Call (877) 373-9230 today and we’ll schedule a free on-site estimate in Silver Lakes or for Jerith repair in Spring Valley Lake. The material you pick today is the problem you solve, or the one you live with, ten years from now.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Silver Lakes and the high-desert I-15 corridor.