Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Mountain View, CA
We provide general contractor services for Dvele construction across the area, handling panelized additions, ADU packages, kitchen remodels, and roof repairs on the factory-built shells Dvele ships to Silicon Valley lots. What makes our work different here is simple: we know Mountain View’s Eichler and ranch-era slab homes, and we know where Dvele’s panel system meets the concrete. Call (877) 373-9230 for a free estimate on your Dvele project in Mountain View.
Why Mountain View Residents Choose Us for Dvele Service
We’ve spent years building, tying in, and finishing Dvele panelized and modular shells across Mountain View and the Peninsula. That means we understand what the factory package looks like when it arrives, and more importantly, what happens when site conditions don’t match the spec sheet. Noel Cardenas, our owner, grew up in Garden Grove and came up through the trades at Santiago Canyon College before spending years on structural remodels and exterior builds. When a Dvele addition needs to tie into a 1960s slab foundation near Old Middlefield, he’s the one mapping the radiant heating loops before anyone picks up a saw. We’re an independent builder, not affiliated with or authorized by Dvele, and we work only to the plans, engineering, and specs the factory and city demand. Our Dvele experience spans full single-family modular homes, ADU packages, and panelized additions, so we’ve seen the system perform across every zip code from 94039 to 94043.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Dvele Construction Problems We Solve in Mountain View
- Panel-to-foundation tie-ins on slab lots. Mountain View’s flatland ranch and Eichler homes sit on original radiant-heating slabs with no attic or basement. Any Dvele addition or re-pipe has to cut into concrete without severing embedded heating loops. Most out-of-area crews underprice this scope because they’ve never mapped a radiant zone before trenching.
- Factory sealant and flashing failures at roof-to-wall and module seams. After several dry summers followed by the winter rain season, the factory-applied sealant on Dvele panel joints dries out and pulls away. On flatland ranch lots we regularly see gutter overflow and interior staining at the seam where the panelized roof meets the original house wall.
- Interior condensation during spring remodel work. Mountain View’s cool, humid spring mornings keep the factory wrap on a Dvele shell wet longer than the schedule assumes. When a kitchen or bath remodel opens the envelope, moisture gets trapped in the panel assembly if the sequencing isn’t managed carefully.
- Roof and drainage failures on flatland slab lots. A Dvele panelized addition that was never graded positively against Mountain View’s winter rains pushes water against the panel base and original slab edge. We’ve corrected this on more than one 1960s ranch addition where the first contractor skipped the finish grading entirely.
- Aging single-pane windows and minimal wall cavities. Mountain View’s 1950s-60s housing stock was framed when 2×4 walls and single-pane glazing were standard. Tying a Dvele net-zero panelized wall assembly into an original ranch wall requires a thermal break detail at the transition, or condensation forms at the joint every winter.
Dvele Service in Mountain View: What Local Conditions Mean for Your Project
Mountain View construction is defined by the collision of Google-era megacampus and infill development with strictly protected single-family neighborhoods overseen by a highly technical, design-review-heavy city planning department. Every Home Remodeling in Mountain View, addition, and new build is scoped, permitted, and scheduled around a tech-workforce clientele with fixed move-in deadlines and a city that scrutinizes design and traffic impacts like few others. For Dvele owners, that means your panelized addition or ADU package doesn’t just need to meet factory engineering, it needs to survive a design review process that examines setbacks, massing, and neighborhood compatibility in detail. On a 1960s ranch-style home off the flatlands near Old Middlefield, the owner wanted a Dvele panelized addition tied into an original radiant-slab wall. Our tech scanned and mapped the embedded heating loops before cutting, then tied the new Dvele foundation into the existing slab with an engineered transition so the old radiant zone wasn’t severed. We resealed the module-to-wall joint and re-graded the side yard away from the panel base ahead of the winter rains, and the addition passed city design review and inspection without a slab re-pour. That’s the difference between knowing Dvele’s system and knowing Mountain View’s lots.
Dvele Models & Products We Service in Mountain View
We service the full Dvele portfolio: modular single-family homes assembled on-site from factory panels, accessory dwelling unit packages, net-zero panelized wall and roof assemblies, and prefab additions or garage-conversion units. When a repair depends on the engineered system, we use Dvele’s factory-supplied panels, flashing, gaskets, and connection hardware. When the failure is in a vent, gutter, glazing unit, or fixture, we use quality aftermarket components that meet or beat spec. Our Mountain View service area coverage means we’re already familiar with the city’s permit process and design review expectations before we even start your project.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Mountain View
What drives cost on Dvele work in Mountain View is the site condition more than the panel system itself. A slab cut for a kitchen bump-out on a radiant-heated Eichler lot prices differently than a crawlspace addition in Los Altos. Below are the market-calibrated ranges we work within for Dvele-related scopes in Mountain View.
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Every estimate is free and itemized. We walk the site, check the slab, the panel seams, and the drainage, then give you a written line-item quote with no change orders unless the scope changes. Call (877) 373-9230 to schedule your Mountain View estimate.
Serving Mountain View, CA - Our Local Coverage Area
We serve Mountain View and nearby communities. Also see Sunnyvale Dvele service. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Mountain View
A Dvele addition on a Mountain View Eichler slab home costs more because the original radiant-heating slab has to be located, mapped, and cut without severing embedded heating loops. There’s no attic or basement to run new utilities through, so every pipe, wire, and duct goes through concrete. The panel-to-foundation transition also needs an engineered detail to keep the original radiant zone intact. Call (877) 373-9230 for an exact quote on your addition, estimates are free.
In most cases, yes. Mountain View’s planning department applies design review to remodels and additions that change exterior appearance, massing, or site coverage. A Dvele kitchen remodel that’s purely interior may need only building permits, but any bump-out, addition, or exterior panel change will trigger design review. We handle the submittal, attend the review, and revise the plans until they clear. Call (877) 373-9230 if you want us to check your specific scope.
We repair the failed sealant and flashing first, then address the drainage condition that caused the failure. Mountain View’s dry summers pull factory sealant away from panel edges, and the winter rains expose every gap. We remove the old sealant, clean the joint, apply a compatible replacement, and re-grade or re-flash so water moves away from the seam. Full panel or roof replacement only happens when the structural interface itself is compromised. Call (877) 373-9230 to schedule a seam inspection before the next rain season.
Yes, and we do it regularly. Mountain View’s 94040 and 94041 flatland lots are often tight, but Dvele’s panelized ADU packages are designed for compact footprints. The challenge is the slab work, setbacks, and design review, which we handle as part of our single-contract scope. We’ve completed Dvele ADU and garage-conversion units on ranch lots where the original garage slab became the foundation, and we also handle Dvele service in Loyola for nearby homeowners. Call (877) 373-9230 for a site assessment.
A full bathroom remodel connected to Dvele work in Mountain View typically runs $9,000 to $28,000 depending on fixture level and whether we’re moving walls or cutting slab. A walk-in shower installation alone runs $4,500 to $12,000. The slab factor matters here too, since a moved drain on a radiant-heated slab costs more than on a crawlspace. Call (877) 373-9230 after you’ve got rough dimensions, and we’ll give you a written range before you commit.
Service Areas Near Mountain View
We serve Dvele owners across the Peninsula and South Bay. Beyond Mountain View, our crews work in Los Altos, Los Altos Hills, Palo Alto, Sunnyvale, and the surrounding Santa Clara County neighborhoods. If you’re within 15 miles of Mountain View, we can likely get a crew to your site within the week.
Book Your Dvele Service in Mountain View Today
The material you pick today is the problem you solve, or the one you live with, ten years from now. If you own a Dvele home or are planning a Dvele addition in Mountain View, call (877) 373-9230 for a free, itemized estimate. We’ll walk the site, check the slab and seams, and tell you exactly what your project needs.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Mountain View since our first Dvele panel tie-in on the Peninsula.