Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in San Francisco, CA
We provide independent CGI cabinet, countertop, and kitchen service across San Francisco, and the work here is different from anywhere else: most CGI boxes in this city sit inside 1880s-1920s wood-frame Victorians on sloped lots, where a half-inch floor slope or a fog-damp crawlspace decides whether the install lasts ten years or fails at the bottom rail in two. Garden Grove Contractors handles CGI service in Noe Valley and across the city as part of full-scope renovation work, so we correct the structure before we hang the boxes. If you’re pricing a CGI kitchen or a repair in San Francisco, call (877) 373-9230 for a free estimate.
Why San Francisco Residents Choose Us for CGI Service
We’ve been installing and retrofitting CGI work long enough to know the boxes are only as good as the floor and wall behind them. In San Francisco, that means we’ve seen frameless CGI cabinets rack out of square on a Victorian floor that’s settled half an inch across six feet. We’ve seen thermofoil door skins peel along the bottom rail because fog-belt moisture wicked up through a damp crawlspace. Noel Cardenas, our owner, learned construction at Santiago Canyon College and spent years working structural remodels and exterior builds before Garden Grove Contractors grew into the full-scope operation it is now. That background shapes how we approach CGI work: we check the cripple wall, the floor plane, and the sill before we spec a single hinge. We are not authorized by CGI and we don’t pretend to be. We spec and price the work on what your building actually needs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in San Francisco
- Thermofoil and laminate door skins delaminating along the bottom rail. In San Francisco’s fog-belt kitchens, especially those over a damp crawlspace or underbuilt cripple wall, the failure runs along the floor line first because moisture wicks up from below. We replace the affected doors and address the moisture source so the new skins don’t repeat the cycle.
- Frameless CGI boxes racking out of square and drawer fronts going out of alignment. A Victorian floor that has settled half an inch across a six-foot run transmits that twist straight into the cabinet box. The box takes the twist, then the soft-close hinges and slides bind. We level and shim the run, then re-set the boxes so the hardware operates clean.
- Particleboard or MDF core shelves and bottoms swelling at sink bases and dishwasher bays. A slow supply-line weep or an old cast-iron drain in a 1900s Edwardian keeps the cabinet interior damp for years without anyone noticing. We pull the affected box, assess whether the carcass is salvageable, and replace swollen cores with plywood where the OEM spec was the weak link.
- Hardware and hinge-plate screws pulling out of old redwood balloon framing. Decades of fog-driven moisture intrusion soften the stud at the point where the installer lagged the CGI box. The screws lose purchase, the box drifts off the wall plane, and doors hang crooked. We re-anchor into sound framing or sister new studs before re-hanging the cabinet.
- Doors and drawer fronts out of alignment after seismic movement. San Francisco sits in active earthquake country, and buildings that have shifted even slightly during a temblor transmit that movement through walls to cabinet faces. We re-plumb the wall plane, then adjust or replace hinges and slides so every front lines up.
CGI Service in San Francisco: What Local Conditions Mean for Your Project
San Francisco’s mandatory soft-story retrofit ordinance covers thousands of wood-frame apartment buildings over garages across 94102-94110, and the retrofit work runs through the same walls a CGI kitchen or bath project is being built against. That’s a structural reality flat-grid cities simply don’t have. New shear walls, moment frames, and foundation anchoring often land directly behind the cabinet run you’re trying to install, which means sequencing matters more than the cabinet spec itself. On a narrow Edwardian block in the CGI in Mission District near Valencia Street, we opened a kitchen in a 1910s two-unit where the rear of the building sat on tall underbuilt wood posts and cripple walls over the sloped lot. The CGI boxes from the prior remodel had delaminated at the bottom rail and pulled loose from the studs because the wall plane had shifted with the hillside. We braced and re-anchored the cripple wall first, re-sheeted and re-plumbed the wall plane, then set new CGI frameless boxes with stainless fasteners and a quartz top templated only after the floor was leveled. The second install has stayed true through two wet winters. That’s what separates a CGI kitchen that survives San Francisco from one that fails: the order of operations.
CGI Models & Products We Service in San Francisco
We work across the CGI Ready-to-Assemble all-plywood cabinet boxes, CGI Euro-style frameless cabinetry with soft-close hardware, CGI Shaker and slab door and drawer fronts in thermofoil and painted MDF, and the CGI quartz and granite countertop programs. When the box is sound, we use CGI’s own replacement doors, drawer fronts, hinges, and slides. When the OEM part is discontinued or the original was the weak link, we spec equivalent quality aftermarket soft-close hardware and solid-wood or plywood shelf stock. For a 1980s-2000s CGI run that has delaminated, we assess honestly whether a door-and-hardware refresh saves the boxes or whether the carcass is too swollen to keep. We maintain that position because San Francisco homeowners deserve a straight answer, not a parts upsell.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in San Francisco
CGI kitchen work in San Francisco typically falls into the ranges below. What drives the cost here more than anywhere else is the condition of the floor and wall the boxes will hang on; a leveling scope or a cripple-wall repair ahead of the cabinet install is common and we price it openly in the estimate rather than discovering it mid-project. Every estimate includes a written line-item quote and we pull permits where the scope requires them.
| Service | Price Range |
|---|---|
| Full Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Island Installation | $3,540 – $11,800 |
If you want an exact number for your San Francisco kitchen, call (877) 373-9230 and we’ll schedule a free estimate. The material you pick today is the problem you solve, or the one you live with, ten years from now.
Serving San Francisco, CA - Our Local Coverage Area
We serve San Francisco and nearby communities. Also see San Francisco General Contractor. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in San Francisco
The peeling runs along the bottom rail because that’s where moisture wicks up from a damp crawlspace or an underbuilt cripple wall below your kitchen. San Francisco’s fog-belt climate keeps those spaces damp for months at a time, and thermofoil skins let go where the moisture concentrates. The fix is not just new doors; you have to cut the moisture path first, then re-skin or replace. Call (877) 373-9230 and we’ll assess the actual source.
We can stage the work, but we won’t hang new boxes on a wall plane that’s about to be reinforced. The retrofit shear walls and foundation anchoring often run through the same walls the kitchen is built against, and installing cabinets before that structural work is done means tearing them out later or watching them rack when the building moves. We coordinate the sequence so the CGI install lands after the structural scope and the boxes go in once, straight. Call (877) 373-9230 to talk through your building’s retrofit timeline.
Frameless CGI boxes will take the twist, and the soft-close hinges and slides will bind within months. Half an inch across a six-foot run is enough to pull drawer fronts out of plane and make doors hang visibly crooked. We level the run with shims or a subfloor correction before the boxes go in, then template the countertop only after the floor is flat. In San Francisco, this is standard prep, not an add-on. Call (877) 373-9230 for a floor assessment and a straight answer on what your kitchen needs.
It depends on the carcass. If the boxes are still square, the backs are solid, and there’s no swelling at the sink base or dishwasher bay, refacing with new CGI doors and drawer fronts plus aftermarket soft-close hardware is often the better spend. If a 1980s-2000s CGI run has delaminated and the particleboard cores are swollen, replacement is more honest than refacing a carcass that won’t hold hardware. We assess on-site and tell you which path makes sense for your San Francisco kitchen. Call (877) 373-9230 to schedule the inspection.
Cabinet replacement alone typically does not require a permit in San Francisco. If your project includes structural work like a soft-story retrofit, wall plane correction, or moving plumbing and electrical, permits are required and the timeline extends through the city’s planning process, which is discretionary and can run weeks to months depending on the district. We pull permits for the scopes that require them and pass inspections before we close out the job. Call (877) 373-9230 for an honest timeline on your specific building.
Service Areas Near San Francisco
We serve San Francisco and the surrounding area, including San Francisco service area coverage across the city. For customers in nearby neighborhoods, we also provide CGI service in Chinatown and CGI service in Tiburon. Our teams run across the city’s hillside districts and the flatlands alike, from the dense Victorians of the Mission to the outer neighborhoods, and we cover the same scope across Corona, Coto De Caza, Garden Grove, Midway City, Stanton, and Westminster.
Book Your CGI Service in San Francisco Today
If your Visitacion Valley CGI service or any San Francisco kitchen needs repair, refacing, or a full replacement, call (877) 373-9230. We’ll schedule a free estimate, look at the floor and wall behind the boxes, and give you a written line-item quote that reflects what your building actually needs. One contractor. Every phase.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving San Francisco and the surrounding area.