Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Los Altos Hills, CA
We install and rebuild Belgard paver driveways, patios, and retaining walls across Los Altos Hills as an independent Los Altos Hills General Contractor, not a manufacturer affiliate. What makes our Belgard work different here is that every installation has to clear the town’s site-development permit and geotechnical review before a single paver goes down, and we’ve built enough Belgard systems on these hillside lots to know exactly how the base prep, drainage, and wall engineering have to be drawn to pass. If you’re planning a Belgard hardscape project in 94022, call us at (877) 373-9230 for a free estimate.

Why Los Altos Hills Residents Choose Us for Belgard Service
Belgard makes a deep product line, from Mega-Arbel and Catalina Slate pavers to the Weston Stone wall system and Brussels Block, and we’ve worked with all of them on Los Altos Hills properties where the slope, soil, and drainage conditions punish a mediocre install. Noel Cardenas, our owner, came up through the trades and has spent years on structural work, concrete, and exterior builds, so when we look at a failing Belgard wall or a sunken paver driveway, we’re reading the failure the way a geotech would, not just reaching for a catalog. The town reviews grading and slope stability harder here than Palo Alto or Los Altos ever will, and that changes how we spec the base, the geogrid, and the edge restraint. One contractor, every phase. You’re not handed off to a separate paver crew for the Belgard work and some other company for the drainage. We handle the full scope, from the countertop to the roofline, and that’s the only way a hillside hardscape project stays coherent.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Solve in Los Altos Hills
- Efflorescence and joint-sand washout on Belgard pavers. When winter rain sheets off a steep Los Altos Hills lot and overwhelms the edge restraint, joint sand washes out and mineral staining creeps across the paver face. We see this most on lots where the base wasn’t cut into the slope, and we fix it by re-establishing edge restraint, re-sanding with a compatible polymeric joint sand, and re-grading the perimeter so water doesn’t sit against the system.
- Retaining-wall block cracking or bowing on Belgard Weston Stone walls. Heavy winter rain on expansive or poorly drained hillside soils pushes walls outward when the original install skipped geogrid or a proper drainage blanket. We rebuild these walls with the reinforcement and drainage the geotech report calls for, not just the blocks that look right.
- Paver settlement and lippage on driveways. When the base wasn’t compacted to the town’s geotechnical recommendations, or the private lane’s drainage wasn’t tied into the site plan, you get lippage and settlement that a simple releveling won’t fix. We cut out the failed section, recompact, and replace the pavers so the surface is flush.
- Fading and surface staining from sprinkler overspray and well-water minerals. A lot of Los Altos Hills properties run on private wells, and hard-water mineral buildup shows up fast on Belgard pavers. We clean and reseal, and we’ll tell you honestly when a paver can be salvaged versus when the staining has gone too deep.
- Edge restraint failure on long, sloped driveways. Long driveways on hillside parcels take a beating where the grade changes, and a failed edge means the whole installation starts creeping. We reset or replace the restraint and re-compact the base at the transition points.
Belgard Service in Los Altos Hills: What Local Conditions Mean for Your Project
The single fact that shapes nearly every Belgard project in Los Altos Hills is that the town’s site-development permit, not the building permit, is usually the long pole in the schedule. The hillside-ordinance review covers grading, drainage, and slope stability, and it’s stricter in Los Altos Hills than in Palo Alto or Mountain View areas by a wide margin. That means a Belgard paver driveway or patio here isn’t just a surface decision. The base design has to be drawn to town standards before the first permit is issued, and that changes the compaction spec, the drainage plan, and the structural detailing on any wall over a few feet. On a steep lot off La Cresta Drive in 94022, we rebuilt a failing Belgard Weston Stone retaining wall that had bowed after years of winter rain because the original install lacked geogrid and a proper drainage blanket. We excavated below the slope failure plane, recompacted the base per the geotech’s recommendations, reinstalled the wall with geogrid and a French drain, and tied the paver patio above it into the new drainage so the town’s site-development inspection signed off. That’s what the permitting process here demands, and it’s also what keeps the wall standing five years later.
Belgard Models & Products We Service in Los Altos Hills
We work across the Belgard lines that show up most on Los Altos Hills properties: Mega-Arbel pavers for driveways and large hardscape runs, Catalina Slate pavers for more irregular, natural-stone looks, Brussels Block for a classic modular paver, and the Weston Stone wall system for segmental retaining walls. For Belgard sales & service, we also tell homeowners straight when a paver or wall section is repairable versus when the base failure means the system has to be rebuilt. Belgard’s modular format often lets us replace sections without tearing out the whole installation, which matters when the town is already scrutinizing your site plan.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Los Altos Hills
What drives the cost on a Belgard project in Los Altos Hills is the base work and the permitting, not just the paver price. A flat lot in another city can often go straight from demo to compacted base to pavers. Here, you’re often cutting into a slope, addressing drainage, and engineering a wall, so the numbers reflect that. Our free estimate includes a walk of the site and a line-item quote so you can see exactly where the money goes.
| Belgard Paver Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
These numbers move with slope, soil conditions, and permitting requirements. No change orders, no vague allowances. Call (877) 373-9230 for an exact quote, and we’ll tell you what your lot actually needs.
Serving Los Altos Hills, CA - Our Local Coverage Area
We serve Los Altos Hills and nearby communities. Also see Belgard repair in Loyola. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Los Altos Hills
Because the town’s geotechnical and site-development review for slope stability and drainage is stricter here than in neighboring cities, and a paver base that would hold fine on flat ground will shift and settle on a hillside lot. We compact and bench the base to the geotech’s recommendations and tie the drainage into the site plan before the pavers go down. Call (877) 373-9230 and we’ll walk your lot to show you what the base actually needs.
Sometimes, but it depends on the condition of the concrete and the slope. If the concrete is structurally sound and the drainage is already working, pavers can go over it as a veneer. If the concrete is cracked and moving, we cut it out and rebuild the base properly, because putting pavers over a failing slab on a hillside just moves the failure to the surface.
The Weston Stone wall system works well when it’s built with geogrid reinforcement and a drainage blanket behind it, which is not optional on a steep Los Altos Hills lot. For smaller garden walls, Brussels Block or a similar modular unit can work, but the engineering has to match the height and the soil. We spec the right wall for the load, not the easiest one to install.
It usually adds weeks to the front end and requires stamped plans for grading, drainage, and slope stability before building permits are issued. If the site-development review is the long pole in your schedule, we plan for it up front so the paver work starts only when the permit is in hand. Call (877) 373-9230 and we’ll map the actual timeline for your address.
Concrete pavers like Belgard are non-combustible and hold up well in wildland-urban interface zones, but the bigger issue is how the hardscape fits into your overall defensible-space plan and Chapter 7A detailing on the home. We coordinate the paver layout with the fire-resistant exterior scope so the whole property works as one system.
Service Areas Near Los Altos Hills
We provide Los Altos Hills service area coverage for Belgard work and hardscape projects across the surrounding community. We also serve Belgard service in Palo Alto and Belgard service in Stanford, where the permitting is lighter but the Belgard standards stay the same.
Book Your Belgard Service in Los Altos Hills Today
If you’re planning a Belgard paver driveway, patio, or retaining wall in Los Altos Hills, call us at (877) 373-9230 for a free estimate. We’ll walk your site, check the slope and the drainage, and give you a line-item quote that holds. The material you pick today is the problem you solve, or the one you live with, ten years from now.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Los Altos Hills and the surrounding foothill communities with Belgard hardscape installation and repair.