Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Mountain View, CA
We provide independent Jerith aluminum fence, gate, and railing repair and installation across Mountain View, including the 94035, 94039, 94040, and 94041 ZIP codes. What makes our Jerith work different here is simple: we know these mid-century ranch and Eichler slabs, and we know where Jerith fence sections and gate hardware fail on them. We’re not affiliated with or authorized by Jerith, which means we answer to you and the site, not a manufacturer program. Call (877) 373-9230 for a free estimate.
Why Mountain View Residents Choose Us for Jerith Service
Most Jerith providers can swap a panel or sell you a new run. Fewer can tell you why a gate post set in a 1950s ranch side yard off Calderon Avenue keeps heeling over every spring. We can. Noel Cardenas leads our team with the habits you pick up when you’ve spent years working structural remodels and exterior builds that have to hold up against real weather cycles. He’s the contractor who walks a property and notices that the fence line sits on a strip of old patio concrete over a radiant-heat slab before he even touches the post. That’s the difference here in Mountain View service area neighborhoods: we diagnose the slab, the soil, and the exposure, then spec the Jerith repair or replacement that actually holds.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Solve in Mountain View
- Powder-coat chalking on west-facing runs. Mountain View’s dry, rain-shadowed summers and high UV age a Jerith finish faster than coastal cities do. The salt-free but dusty air leaves a chalk film that hides the breakdown underneath. We clean, prep, and refinish or replace affected sections before the aluminum underneath starts to oxidize.
- Post footings heaving in flatland clay. The 94040 and 94041 flatlands sit on expansive clay-and-fill soils that swell after winter rains. Posts set shallow in old walkway or patio concrete rack out of plumb by spring, pulling gate hinges out of alignment. We reset posts deeper and wider, clearing the slab edge properly.
- Electrolytic corrosion at steel-to-aluminum anchors. On 1950s and 60s ranch lots, original galvanized or cast-iron anchors and steel gate posts meet Jerith’s extruded aluminum sections. The aluminum is fine, but the steel rusts and the bracket loosens. We isolate the dissimilar metals and replace the corroded anchor hardware.
- Racked or bowed panels on sloped Eichler lots. When a prior owner set Jerith panels level across a grade change, the pickets go out of plumb and gate latches stop meeting the strike. We re-rack the panels to follow grade or rebuild the run with proper racking sections.
- Gate drag after the rainy season. Winter moisture in Mountain View’s clay soils moves footings just enough that a Jerith self-closing gate starts dragging or won’t latch. We don’t just shim the hinge. We correct the post and re-hang the gate so the self-latching hardware actually meets the strike.
Jerith Service in Mountain View: What Local Conditions Mean for Your Project
Mountain View’s flatland Eichler and ranch tracts run on original radiant-heat slabs with no attic and no basement. That single fact changes how a Jerith fence or gate footing gets installed anywhere near the house. The slab carries embedded heating tubing and shallow utilities just below the surface, so a post hole set with a power auger can cut a heating line in seconds. We locate the tubing path and hand-dig around it. Every time. On a 1950s ranch lot off Calderon Avenue in the flatlands, a homeowner needed home remodeling after their Jerith aluminum side-yard fence had heeled over after two wet winters because the original posts were set only a few inches into a strip of old patio concrete over the radiant slab. We pulled the racked Residential Grade panels, hand-dug new footings wider and deeper to clear the slab edge and embedded tubing, re-set the posts in concrete, and re-hung the gate with a new self-closing hinge so it latched clean. We reused the sound panels instead of replacing the whole run. That’s the kind of judgment you can’t get from a generic fence crew that’s never worked a Mountain View slab house.
Jerith Models & Products We Service in Mountain View
We work on Jerith Industrial Grade aluminum ornamental fence, the Residential Grade 3-rail and 4-rail aluminum fence lines, Jerith aluminum pool-code fence with self-closing and self-latching gates, and Jerith aluminum railing and gate systems including Arlington and Regency picket profiles. When matching an existing run, we use genuine Jerith extruded sections, brackets, and post caps so the profile and finish stay consistent. For wear items like hinges and self-closing gate hardware, we use quality aftermarket components where the OEM piece is a known failure point. That parts approach keeps most general contractor repairs faster and more cost-effective than a full run replacement would be.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Mountain View
Most Jerith service in Sunnyvale and Mountain View repairs fall between $400 and $1,800 depending on what failed. A full aluminum fence installation on a typical flatland lot runs $4,000 to $10,000. Here’s how those numbers break down:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
Several factors move the number on a Mountain View Jerith job: whether the site is slab-on-grade with radiant tubing to work around, the condition of the existing footings, how much grade change the run follows, and whether Mountain View’s design-review process requires modifications. The material you pick today is the problem you solve, or the one you live with, ten years from now. We quote it straight. Call (877) 373-9230 for a free estimate with line-item pricing.
Serving Mountain View, CA - Our Local Coverage Area
We serve Mountain View and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Mountain View
Yes, we can. We locate the embedded heating tubing path first and hand-dig around it, setting the post so it clears the slab edge and any shallow utilities. We do this routinely on Mountain View’s slab-on-grade ranch and Eichler lots. Call (877) 373-9230 and we’ll assess your site before any digging starts.
It can, depending on where you live and what you’re changing. Mountain View runs a design-review-heavy planning process, especially for visible front-yard work and anything that affects the public right-of-way or traffic sight lines. We check the specific requirements for your parcel and build the submittal accordingly, so your fence doesn’t stall at the counter.
That’s UV degradation of the powder coat, accelerated by Mountain View’s dry, rain-shadowed summers and the dusty air that leaves a chalk film on west-facing runs. The film hides the breakdown, but the aluminum is often still sound underneath. We can clean, prep, and refinish or replace the affected sections.
Usually it can be fixed. Mountain View’s clay soils swell with winter moisture and shift footings just enough to pull a gate out of alignment. We correct the post, re-hang the gate on new self-closing hardware, and adjust the strike so it latches clean. Replacement is only the call when the posts or panels are structurally gone. Call (877) 373-9230 and we’ll tell you straight which one you have.
Yes. We source genuine Jerith extruded sections, brackets, and post caps to match the existing profile and finish, so the Jerith repair in Loyola or Mountain View blends into the run. If the posts and footings are sound, we repair. If the line is racked, rusted at the anchors, or sitting on failed footings, replacement is the honest call.
Service Areas Near Mountain View
We also serve Jerith fence and gate work in the surrounding communities, including Jerith service in Los Altos, Jerith service in Los Altos Hills, and nearby neighborhoods across the mid-Peninsula. Same diagnosis, same slab-aware installation, same straight pricing.
Book Your Jerith Service in Mountain View Today
We know the fences, the slabs, and the soil here. We’ll diagnose your Jerith run honestly and quote the repair or replacement without inflating the scope. Call (877) 373-9230 to schedule your free estimate.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Mountain View since day one.