Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Fontana, CA
We provide independent Ameristar service and full-scope construction across Fontana, from the 92335 core to the 92336 and 92337 subdivisions. What sets our Ameristar work apart here is that we know these units are nearly always tied to the house around them: mid-century tract homes with unpermitted additions, 1980s subdivisions with undersized return air, and rooflines that take a beating from Santa Ana wind. Call (877) 373-9230 for a free estimate on Ameristar service, kitchen or bath remodels, or roofing in Fontana.
Why Fontana Residents Choose Us for Ameristar Service
We’ve spent years working on the Ameristar lines actually installed across Fontana’s tract homes and warehouse-adjacent commercial spaces: M4AC condensers, M4HP4 heat pumps, V-Series gas furnaces, and S-Series split systems. Builder-grade equipment in inland heat, wind, and dust doesn’t fail like coastal units do, and we don’t treat it like it should. Noel Cardenas, our owner, grew up in Garden Grove and came up through the trades the long way, so he’s never been one to quote a part without looking at the air around it first. We’re an independent Ameristar service provider, not manufacturer-affiliated or authorized, which means we recommend what the house actually needs, not what a brand program tells us to push. For Fontana homeowners, that matters.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Ameristar Construction Problems We Solve in Fontana
- M4AC condenser coils fouling fast in dust and wind. Fontana sits at the base of the Cajon Pass, and the same wind that kicks up dust every afternoon cakes M4AC coils in a matter of months, not years. Units set low against stucco walls in the 92335 core are the worst. Coil cleaning and repair is routine for us here, and a neglected coil in July heat is a compressor failure waiting to happen.
- Capacitor and contactor failures through long 100°F-plus summers. Ameristar outdoor units run hard in Fontana’s heat. We see swollen run capacitors on units only a few years old, especially where the condenser sits in full afternoon sun on a south-facing side yard.
- Air handler cabinets rusting and rattling in converted garages. Older Fontana homes frequently have garage conversions that were never properly conditioned. Ameristar air handlers mounted in those spaces pick up rust on cabinet panels and fasteners, and the rattling is the first sign the return air was never sized right.
- Heat pump reversing valves and defrost boards acting up after Santa Ana events. On M4HP4 units, wind-driven debris gets into the outdoor coil, and right behind it come reversing valve and defrost board issues. In Fontana, we know to check the coil first when a heat pump starts blowing warm air in cooling mode after a wind event.
- Short-cycling from undersized return air in 1980s-2000s subdivisions. The north and south tract builds in 92336 and 92337 often have return-air setups that were marginal from day one. An Ameristar system short-cycling in a newer Fontana subdivision is frequently a ducting problem, not a unit problem, and we scope both before recommending parts.
Ameristar Service in Fontana: What Local Conditions Mean for Your Project
Fontana splits roughly along its historic core in 92335, where mid-century steel-mill-era homes were built tight to the old rail and mill footprint, versus the 1980s to 2000s subdivisions pushed north and south into 92336 and 92337. The same Ameristar rough-in, duct, or ventilation scope gets two very different plan-check treatments in one city. A furnace swap in a 1960s central Fontana house off Sierra Avenue will likely surface unpermitted work from decades ago, which means pulling correction permits through the City before the new unit gets signed off. The same job in a 1999 subdivision home in the north end usually sails through with a standard mechanical permit. We scope to the specific ZIP, not to “Fontana” broadly, because the difference in time and paperwork between those two is real and it’s almost never apparent until someone opens the wall or the access panel.
Ameristar Models & Products We Service in Fontana
We work on the Ameristar lines actually found in Fontana homes: M4AC3 and M4AC4 condensing units, M4HP4 series heat pumps, V-Series gas furnaces, and S-Series split system air conditioners. Our parts approach is simple: Ameristar OEM parts for coils, boards, and valves where they’re still available, and quality aftermarket capacitors, contactors, and motors where OEM equivalents are overpriced or discontinued. If an Ameristar condenser has a failed compressor or a rusted-through coil on a 15-year-old unit, we’ll tell you honestly when replacement beats another repair. We’re an independent Ameristar service provider, not manufacturer-affiliated or authorized, so that honesty doesn’t cost us anything. See more about our Ameristar work.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Fontana
Pricing for construction and Ameristar-related work in Fontana depends on scope, square footage, and which side of the city you’re in. Core 92335 homes often carry plan-check surprises that newer subdivisions don’t, and we factor that into the estimate up front rather than springing it on you mid-project. Here’s what we typically see:
| Project | Typical Fontana Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Every estimate is free and written line-by-line. Call (877) 373-9230 and we’ll walk the property in one visit, take measurements, and give you numbers you can actually plan around.
Serving Fontana, CA - Our Local Coverage Area
We serve Fontana and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Fontana
Yes. Any Ameristar furnace, heat pump, or condenser replacement in Fontana requires a mechanical permit through the City of Fontana. If you’re in an older central Fontana home and the permit review surfaces unpermitted prior work, we handle the correction permit process as part of the job instead of leaving you to sort it out alone. Call (877) 373-9230 and we’ll tell you what your specific address is likely to trigger.
Short-cycling in Fontana is usually one of three things: a fouled M4AC condenser coil from dust and wind off the Cajon Pass, a weak capacitor in the heat, or undersized return air in the original tract-home ducting. We diagnose all three before quoting a repair, because replacing a part won’t fix a duct problem. Call (877) 373-9230 to book a service visit.
Yes, but the unpermitted work has to come into compliance first. On a teardown-rebuild block off Sierra Avenue in the 92335 core, we opened a 1960s stucco ranch for a full kitchen remodel and found an unpermitted garage conversion behind the wall. We pulled a correction permit through the City before the Ameristar furnace and ductwork could be re-installed. Once the inspector signed off, we set new Ameristar cabinets, a Cambria quartz top, and re-ducted the closet to a legal return so the system could actually breathe. It adds time, but doing it right means the rest of the house doesn’t come back to bite you later. Call (877) 373-9230 for a free assessment.
We install and service Ameristar equipment as an independent provider, and we’re not authorized, sponsored, or endorsed by Ameristar. That independence means we can also carry the full renovation scope around the unit: kitchen and bath remodels, roofing, windows, fencing, and hardscape, all under one contract. For more on what we do with the brand, see our Ameristar service page.
Fontana roofs need wind-rated shingle installation and attention to edge details, because Santa Ana gusts peel shingles and drive debris into boots and flashing joints. We spec GAF, CertainTeed, or Owens Corning materials based on exposure and wind load, and we repair or replace flashing at the same time. Roof repairs in Fontana run $400 to $1,800 for typical wind damage; full replacement runs $8,000 to $20,000. Call (877) 373-9230 for an exact quote, free.
Service Areas Near Fontana
Our Fontana work regularly reaches into Fontana service area neighbors and nearby communities. We serve Bloomington to the west, and you can read about our Ameristar service in Bloomington. We also cover Mead Valley toward the southeast, and details are on our Ameristar service in Mead Valley page. Corona, Rialto, and Rancho Cucamonga homeowners call us for the same full-scope work, and we’re glad to cross the city line.
Book Your Ameristar Service in Fontana Today
From a short-cycling M4AC to a full kitchen remodel with new roof above it, one contractor handles every phase. Call (877) 373-9230 for your free estimate, and we’ll scope the exact work your Fontana home needs.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Fontana and the surrounding Inland Empire.