Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Daly City, CA
We’re Garden Grove Contractors, an independent Mr-Glass repair in Broadmoor and Daly City’s fog belt. The short version: we repair and replace Mr-Glass windows, patio sliders, and shower enclosures, and the reason our work holds up here is simple – we test for moisture before we seal anything. In Daly City, that step matters more than it does almost anywhere else in the Bay Area. Call (877) 373-9230 for a free estimate on any Mr-Glass project, from a single fogged slider to a full-home window replacement.
Why Daly City Residents Choose Us for Mr-Glass Service
Noel Cardenas, our owner, grew up in the West Grove neighborhood of Garden Grove and came up through the construction trades at Santiago Canyon College in Orange. He built this company around a straightforward idea: know the building, know the material, and don’t guess. When it comes to Mr-Glass products in Daly City, that means understanding how aluminum frames, tempered glass, and perimeter sealant behave when they sit in marine-layer damp for months at a stretch.
We’ve spent years working on Mr-Glass windows and enclosures in Daly City’s specific housing stock – mid-century stucco-over-wood-frame homes, tight-lot row houses, and older multifamily buildings along the Mission Street corridor. Our Mr-Glass work covers Daly City’s 94014, 94015, 94016, and 94017 ZIP codes. We’re insured and bonded, and every estimate is free.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Daly City
- Fogged dual-pane units. Failed seals are the most common Mr-Glass failure we see. In Daly City, the problem compounds because marine-layer damp works into older perimeter seals on west-side hillsides, so a unit that looks fine in August fogs solid by December. We remove the sash or panel, inspect the frame, and determine whether a sealed glass replacement beats a full frame swap.
- Aluminum frame oxidation and fastener corrosion. Salt-laden onshore wind hits north- and west-facing openings hard here. We regularly see pitting, white oxidation bloom, and fasteners that have rusted to the point where sashes can’t be removed safely. We replace corroded hardware and re-seal frames before they compromise the surrounding stucco.
- Sliders that bind or jump the track. Wind-driven mist carries grit into roller tracks. After a few years, rollers seize, rust, or grind themselves flat, so the door drags or yanks sideways. We clean or replace tracks, rollers, and bottom sweeps – and we verify the frame is square before we call it done.
- Failed perimeter sealant and glazing bead. Fog-belt moisture gets behind the frame, and by the time the homeowner notices interior staining, the wood behind the stucco has often started to rot. We pull the old bead, inspect the rough opening, and rebuild or re-flash as needed before the new unit goes in.
- Corroded Mr-Glass shower enclosures. In older Daly City bathrooms with original 1960s and 1970s enclosures, aluminum pivots and hinges corrode from decades of steam plus salt air. We replace hardware, re-glaze panels, or install new framed or semi-frameless units where the old frame is beyond saving.
Mr-Glass Service in Daly City: What Local Conditions Mean for Your Project
Daly City sits right on the Pacific fog belt, and that fact changes how our crews approach every single Mr-Glass job. On the west-side hills – around the 94015 ZIP – the fog rolls in so hard and so often that glass units and their frames stay wet for much of the year. Before we re-glaze or re-seal any Mr-Glass window or slider here, we moisture-test the framing and substrate. A damp substrate traps moisture behind fresh sealant and blisters. It looks fine for three months, then the sealant peels, the frame wicks water, and the customer calls us back wondering what went wrong. That failure mode shows up far less just a few miles east in South San Francisco or Brisbane. Daly City’s marine layer is the defining construction variable of this city, and anyone doing Mr-Glass work here without accounting for it is guessing. We don’t guess.
On a mid-century stucco-over-wood-frame home in the 94015 hills, our crew pulled a fogged, corroded Mr-Glass aluminum slider and found the sill and jack studs soft from years of wind-driven moisture behind a failed glazing bead. We cut out and sistered the rotted framing, re-flashed the opening, and set a new insulated slider with fog-resistant sealing, then verified the substrate was dry before we caulked the perimeter. That’s the difference between a window swap and an actual repair.
Mr-Glass Models & Products We Service in Daly City
Our crews work on the full range of Mr-Glass products installed across Daly City over the past several decades. That includes Mr-Glass aluminum single-hung and sliding windows, the builder-grade retrofit series common in mid-century homes throughout 94014 and 94015. We also service Mr-Glass framed and semi-frameless sliding shower door enclosures, Mr-Glass vinyl-framed sliding patio doors, and Mr-Glass pivot and hinged shower doors with clear or frosted tempered panels.
Our approach on parts is simple and direct. We match Mr-Glass OEM glass and hardware where it’s still available. When a product line is discontinued and OEM parts are gone, we spec quality aftermarket rollers, hinges, and weatherseal that fit correctly and last. A sound Mr-Glass frame rarely needs replacement – what fails is the glass, the seal, the rollers, or the sealant. We’ll tell you honestly when re-glazing or re-hardening an existing unit is the better call, and when the rot behind the frame means a full replacement is the only responsible option.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Daly City
What you’ll pay for Mr-Glass work in Daly City depends on scope, access, and what our moisture testing reveals. The ranges below reflect what we typically see on fog-belt homes here.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
The price moves with the number of openings, whether we find rot behind the frame, whether the home’s stucco needs patching after the install, and whether the job requires impact-rated glass. Every estimate includes a written line-item breakdown, and we stick to it. Call (877) 373-9230 to schedule your free estimate – we’ll come out, test the existing units, and give you a number you can plan around.
Serving Daly City, CA - Our Local Coverage Area
We serve Daly City and nearby communities. Also see Colma Mr-Glass service. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Daly City
The failed glass unit can usually be replaced without swapping the whole window frame, as long as the frame itself is still square and the surrounding opening is dry. In Daly City we moisture-test the framing first, because if damp has worked behind the glazing bead, re-glazing alone will fail again within a season. Call (877) 373-9230 and we’ll tell you honestly which route makes sense.
Salt-laden onshore wind and persistent marine-layer damp accelerate corrosion of aluminum frames and fasteners, especially on north- and west-facing openings. That’s a Daly City condition first and a material issue second. We replace corroded hardware and re-seal frames with products rated for salt-air exposure. Call (877) 373-9230 for a free inspection.
Yes – the substrate has to be dry. Daly City’s fog keeps window frames damp for much of the year, and sealing over a damp substrate traps moisture behind fresh sealant and causes blistering and peeling. We test before we seal, every time, on every opening. That’s the step most contractors here skip, and it’s the step that decides whether the repair lasts three years or fifteen.
In most cases, yes. We replace Mr-Glass shower enclosures as a standalone scope – new framed or semi-frameless panels, new hinges, new tracks – without touching tile, plumbing, or the rest of the bathroom. We’ll confirm the existing threshold and walls can support the new hardware before we order anything. Estimates are free; call (877) 373-9230.
Window replacement in Daly City typically requires a permit when the opening size changes or when structural framing is involved. Straight same-size replacements and shower enclosure swaps usually don’t. We handle permitting when it’s needed and we’ll tell you upfront whether your specific project requires it.
Service Areas Near Daly City
We serve Daly City and the surrounding areas throughout the Peninsula and down through Orange County. Our Daly City service area covers the 94014, 94015, 94016, and 94017 ZIP codes. We also provide Mr-Glass service in Mission District for clients just over the hill, and Mr-Glass service in Noe Valley for homeowners south of the fog line. Other nearby communities include Corona, Coto De Caza, Garden Grove, Midway City, Stanton, and Westminster.
Book Your Mr-Glass Service in Daly City Today
If you’ve got a fogged slider, a corroded shower enclosure, or windows that let the fog in more than they keep it out, call (877) 373-9230. We’ll schedule a free estimate, moisture-test the openings, and give you a line-item quote you can actually use. One contractor. Every phase. From the countertop to the roofline – and every window in between.
Written by Noel Cardenas, Owner at Garden Grove Contractors, serving Daly City and the surrounding Bay Area.